-
Wind modeling and simulation using PSCAD Software
-
MICRO GRID modeling and Transient studies in PSCAD
-
DFIG Studies in using PSCAD software
-
PMSM modeling and simulation uisng PSCAD
-
VECTOR control of Drives in PSCAD
-
A.C drives control using PSCAD
-
Transmission Line modeling and studies
-
Renewable energy modeling and analysis
-
Power electronics converters in PSCAD
-
Induction Motor Performance studies in PSCAD
-
An hybrid multi level inverter based DSTATCOM control
-
An Improved Maximum Power Point Tracking for Photovoltaic Grid-Connected Inverter Based on Voltage-Oriented Control
-
An SVPWM-Based Switching Pattern for Stand-Alone and Grid-Connected Three-Phase Single-Stage Boost Inverters
-
Analysis and Simplification of Three-Dimensional Space Vector PWM for Three-Phase Four-Leg Inverters
-
Analysis of the variation effect of induction machine parameters for VECTORIAL controls
-
Analysis, Design, Modeling, and Implementation of an Active Clamp HF Link Converter 2011
-
Application of SMES Unit in Improving the Performance of an AC/DC Power System.
-
Assessment of Power Quality in Wind Power Systems.
-
Cascaded multilevel voltage source inverter based active power filter for harmonics and reactive power compensation.
-
Case study on power quality improvement of thirty bus system with UPFC
-
Comparative study on carrier overlapping PWM strategies for five level diode clamped inverter.
-
Comparison of 3-level and 9-level inverter-fed induction motor drives .
-
Comparison of SSSC and d-q control scheme based UPFC for power flow control.
-
Comparison of z-source inverter fed induction motor with traditional source inverter systems.
-
Comparison performance of induction motor using SVPWM and hysteresis current controller.
-
Composite Energy Storage System Involving Battery and Ultra capacitor With Dynamic Energy Management in Micro grid Applications
-
Constant Frequency-Unified Power Quality Conditioner
-
Constant Power Control of DFIG Wind Turbines With Super capacitor Energy Storage .
-
Control and Analysis of the Modular Multilevel Cascade Converter Based on Double-Star Chopper-Cells.
-
Control of a Doubly Fed Induction Generator via an Indirect Matrix Converter With Changing DC Voltage 2011.
-
Control Strategy for Harmonic Elimination in Stand-Alone DFIG Applications With Nonlinear Loads .
-
Coordinated Voltage Control Scheme for SEIG-Based Wind Park Utilizing Substation STATCOM and ULTC Transformer
-
Damping of Low Frequency Oscillations in Power Systems with Neuro-Fuzzy UPFC Controller.
-
Damping Power System Oscillations Using a Hybrid Series Capacitive Compensation Scheme.
-
DC/DC Boost Converter Functionality in a Three-Phase Indirect Matrix Converter
-
Design and effective operation of double winding synchronous reluctance motor.
-
Design and Implementation of Neuro-Fuzzy Vector Control for Wind-Driven Doubly-Fed Induction Generator.
-
Design and simulation of UPQC to improve power quality and transfer power of photovoltaic array to grid.
-
Design Strategy for Optimum Rating Selection of Interline DVR.
-
Design, implementation and construction of a multilevel inverter for robot arm drive, by means of a brushless motor.
-
Development of a Nonlinear Control Strategy for the DC Power Transferring System.
-
Direct electromagnetic torque control of induction motors powered by high power PWM inverters for two levels or three levels.
-
Direct electromagnetic torque control of induction motors powered by high power PWM inverters for two levels or three levels.
-
Direct Torque and Indirect Flux Control of Brushless DC Motor.
-
Direct Voltage Control for a Stand-Alone Wind-Driven Self-Excited Induction Generator With Improved Power Quality.
-
Dynamic Modeling and Improved Control of DFIG Under Distorted Grid Voltage Conditions.
-
Dynamic Modeling and Performance Analysis of a Grid-Connected Current-Source Inverter-Based Photovoltaic System.
-
Dynamic Stability Improvement of an Integrated Grid-Connected Offshore Wind Farm and Marine-Current Farm Using a STATCOM.
-
Energy Management and Power Control of a Hybrid Active Wind Generator for Distributed Power Generation and Grid Integration.
-
Energy optimization of field oriented six-phase induction motor drive
-
Enhanced Power Quality Control Strategy for Single-Phase Inverters in Distributed Generation Systems
-
Fault Detection and Mitigation in Multilevel Converter STATCOMs
-
Fault Ride-Through of a DFIG Wind Turbine Using a Dynamic Voltage Restorer During Symmetrical and Asymmetrical Grid Faults.
-
Feasibility Analysis of the Positioning of Superconducting Fault Current Limiters for the Smart Grid Application Using Simulink and SimPowerSystem
-
Flying Capacitor Multilevel Inverter Based Shunt Active Power Filter with Trifling Susceptibility to Divisional Voltages Deregulation
-
Grid Interconnection of Renewable Energy Sources at the Distribution Level With Power-Quality Improvement Features.
-
Harmonic orientation of pulse width modulation technique in multilevel inverters
-
Hexagram-Converter-Based STATCOM for Voltage Support in Fixed-Speed Wind Turbine Generation Systems.
-
High-Efficiency Regulation Method for a Zero-Current and Zero-Voltage Current-Fed Push�Pull Converter .
-
Hybrid Flying-Capacitor-Based Active-Neutral-Point-Clamped Five-Level Converter Operated With SHE-PWM
-
Hysteresis Modulation of Multilevel Inverters.
-
Implementation of Neural-Network-Controlled Three-Leg VSC and a Transformer as Three-Phase Four-Wire DSTATCOM
-
Improvements in power quality and efficiency with a new AC/DC high current converter (WSEAS transactions on circuits and systems)
-
Improving grid power quality with facts device on integration of wind energy system.
-
Induction machine DTC optimization using artificial intelligence for EV�s applications.
-
Induction Motor Drive Using Seven Level Multilevel Inverter for Energy Saving in Variable Torque Load Application.
-
Interconnection of Two Very Weak AC Systems by VSC-HVDC Links Using Power-Synchronization Control.
-
Investigation of SSR characteristics of hybrid series compensated power system with SSSC.
-
Isolated Buck�Boost DC/DC Converters Suitable for Wide Input-Voltage Range.
-
Load Compensation for Diesel Generator-Based Isolated Generation System Employing DSTATCOM.
-
Load compensation for single phase system using series active filter.
-
Loading Balance of Distribution Feeders With Loop Power Controllers Considering Photovoltaic Generation.
-
Low Frequency Oscillations Damping by Static Synchronous Series Compensator Equipped with an Auxiliary Fuzzy Logic Controller.
-
Matrix Converter-Based Unified Power-Flow Controllers: Advanced Direct Power Control Method.
-
Modeling and analysis of cascaded h-bridge inverter for wind driven Isolated self � excited induction generators.
-
Modeling and Control of VSC-HVDC Links Connected to Island Systems
-
Modulation for Three-Phase Transformer less Z-Source Inverter to Reduce Leakage Currents in Photovoltaic Systems.
-
Modulation index effect on the 5-level she-PWM voltage source inverter.
-
Mono-variable and Multivariable Voltage Regulator Design for a Synchronous Generator Modeled With Fixed and Variable Loads.
-
Multidimensional Two-Level Multiphase Space Vector PWM Algorithm and Its Comparison With Multi frequency Space Vector PWM Method.
-
Multilevel inverter to reduce common mode voltage in ac motor drives using SPWM technique.
-
Multilevel inverter, based on multi-stage connection of three-level converters, scaled in power of three.
-
Neural-Network-Based Integrated Electronic Load Controller for Isolated Asynchronous Generators in Small Hydro Generation 2011
-
Neutral-Point Potential Balancing of Three-Level Inverters in Direct-Driven Wind Energy Conversion System.
-
Nine-level inverter system for an open-end winding.
-
On chip implementation if z-source inverter fed induction motor drive.
-
Online Efficiency Optimization of a Fuzzy-Logic-Controller-Based IPMSM Drive.
-
Online Optimal Reactive Power Control Strategy of PV Inverters.
-
Parallel Operation of DFIGs in Three-Phase Four-Wire Autonomous Wind Energy Conversion System.
-
Performance Comparison of VSC-Based Shunt and Series Compensators Used for Load Voltage Control in Distribution Systems.
-
Performance of voltage source multilevel inverter - fed induction motor drive using SIMULINK
-
Performance Investigation of Neural-Network-Based Unified Power-Quality Conditioner.
-
Power Quality Conditioner with Series-Parallel Compensation Applied to Single-Phase Systems.
-
Power quality improvement for electrical system feeding metro subway in EGYPT
-
Power quality improvement in dc drives using MATLAB/SIMULINK
-
Power Quality Improvement of 1-Φ Grid-connected PWM Inverter using Fuzzy with Hysteresis Current Controller
-
Power quality improvement of wind turbines using doubly-fed induction machines.
-
Power quality improvement using a fuzzy logic control of a series active filter
-
Power Quality Improvement Using Interline Unified Power Quality Conditioner.
-
Power System Voltage Regulation via STATCOM Internal Nonlinear Control
-
Predictive Current Control Implementation in the Sensor less Induction Motor Drive.
-
Primary-Side-Converter-Assisted Soft-Switching Scheme for an AC/AC Converter in a Cyclo-converter-Type High-Frequency-Link Inverter.
-
Quasi-Z-Source-Based Isolated DC/DC Converters for Distributed Power Generation 2011.
Email: